Filtres

Sous-Catégorie

Catégorie

Type de produit

Marque

Compatibilité

Mémoire vive (RAM)

Connectique

Résolution

Kit complet

Type de batterie

Type de moteur

Fonctions

Couleur

Couleur(s)

Prix

€0.00 - €330.00

En stock

En promotion

Wi-Fi

Longueur du câble

Matière

Capacité de la batterie

Technologie d'affichage

Type de stockage

Bluetooth

Montage nécessaire

Capacité de stockage

Category: Accessories

There are 542 products.

Showing 481-504 of 542 item(s)

Case for ODROID XU4

Protective case for Odroid XU4 board with pre-cut heat sink or fan. Available in 2 colors (Transparent or black) PolycarbonateSize: 90 x 59 x 28 mmWeight: 32g If you want a more secure lock, you can use screws. There are 2 screw holes on the bottom side.

Price €8.00

HAT LTE Cat-4 4G / 3G / 2G...

4G SIM7600G-H module, compatible with 2G / 3G / 4G network (worldwide support), withdedicated pogopinfor Raspberry Pi Zero / Zero and MicroUSB connector for other cards Raspberry Pi or PC Supports dialing, phone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports the positioning of...

Price €75.00

Right Angle HDMI Adapter

Making custom HDMI cables has never been easier. Simply grab one of our HDMI ribbon cables, then swap and fit one of our HDMI adapters to each end using the flexible cable clips. There are so many options!

Price €5.70

Membrane 3x4 Matrix Keypad + extras

Enter your secret key into this digital matrix keyboard. This 12-button keypad, arranged in a 3x4 telephone line grid, is made of a thin, flexible membrane with an adhesive backing so you can flexible membrane with an adhesive backing so you can attach it to any surface.

Price €1.40

Camera platform for Micro:Bit

This camera platform mainly includes two 180 degree servos, a WIFI camera and an acrylic platform mount. As long as you have the ability to drive two 5v servos and a WIFI camera serial port, you can use this camera platform. It is a DIY product supporting a variety of add-on boards or DIY...

Price €22.61
  • On sale!

Screen mount for Raspberry PI

Very practical to mount your raspberry behind a screen. This mount works on many standard screens. This mount for Raspberry Pi works with or without a case (case not included!) and allows you to hang your Pi on different supports.

Price €4.96
  • Online only

HyperPixel 2.1 Hi-Res round...

HyperPixel 2.1 Round with a crisp, bright IPS display, touch screen and high-speed DPI interface Compatible with any Raspberry with a 40-pin header ideal for custom interfaces and control panels Designed to mount a Raspberry Pi Zero on the back without it showing Pre-welded, ready-to-use...

Price €59.00

T Cobbler - 40 PIN GPIO for...

The Pi T-Cobbler Plus GPIO Breakout for Raspberry Pi B+ is a T-shaped GPIO extension, allowing you touse a solderless breadboard with your Raspberry Pi B+. Simply connect your Pi T-Cobbler Plus (assembled) to your solderless breadboard, then connect it to your Raspberry Pi via its GPIO I/O cable...

Price €1.90
  • Out-of-Stock

USB Cable Adapter Jack for...

Adapt your cable for Raspberry Pi This female jack with a Micro-B male and Micro-female plug for Raspberry Pi is very practical to ensure all your connections. This compact USB cable can be installed anywhere and allows you to charge all your digital devices (phone, Bluetooth device).

Price €3.80

NB-IoT SIM7020E module for...

The SIM7020E is a NarrowBand-Internet of Things (NB-IoT) module specifically designed for the Raspberry Pi Pico and is ideal for IoT applications Supports multiple NB-IoT frequency bands, UART communication, serial AT command control, support for multiple communication protocols, support for...

Price €19.99

DC Female to 2.1mm jack adapter

If you need to connect a DC power supply to a board that doesn't have a DC Jack port, this adapter will come in handy! There is a 2.1mm DC jack on one end, and a screw terminal on the other. The terminals are marked with positive/negative signs.

Price €2.50

4xAA battery holder with cover...

The four batteries are connected in series, for a nominal power of 6V DC. - ON/OFF switch to control the power supply - Battery type: AA- Includes a removable sliding cover- 12.70 cm tinned wire and square configuration

Price €1.90

GrovePi Zero Base Kit

GrovePi Zero makes electronic prototyping fast and easy with Raspberry Pi Zero. The powerful little Raspberry Pi Zero is waiting for you to unleash your creativity and build the projects you're passionate about. With the GrovePi Zero, you can get started on your connected device projects in...

Price €72.00
  • Out-of-Stock

Clear Acrylic Case for Raspberry...

Acrylic case for Raspberry Pi Pico, pdouble-sided protection Raised top panel, keeping enough space for the pins, einverted notch of the port USB and debugging pins SWD You can still attach your Raspberry Pi Pico to a test plate with this case BOOTSEL button protection cap...

Price €2.94

16 x 10 RGB LED array for...

16 x 10 RGB LED array designed for Raspberry Pi Pico Equipped with 160 constant current RGB LEDs with IC quality controller and LED chip IC controller with high reliability, high anti-interference performance, high constant current accuracy and low power consumption Programmable with C/C++ and...

Price €15.96

Four Letter pHAT

Use Four Letter pHAT to display ... four letter words!Four Letter pHAT has four 14-segment displays that you can use to display text, numbers and a host of other characters. Its LEDs are retro green in style, just like your old digital alarm clock. They are driven by the HT16K33 chip on I2C....

Price €12.00

PAA5100JE near optical flow SPI...

Breakout navigation module ideal for surface detection and floor tracking of a robot vacuum cleaner PAA5100JE sensor that uses a low-resolution camera and intelligent algorithms to detect surface movement Very narrow range of 15 to 35 mm, suitable for use with a wide variety of different...

Price €24.95

Breadboard Pibow

This plate allows you to realize your projects. It is a great support for your prototypes, and allows you to fix a Pibow cut box. You will have the possibility to put either a board with 400 stitches or two small boards of 170 stitches.

Price €6.68

Bluetooth LE Development Board

Bluetooth LE development board designed for IoT and AI applications Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED Embedded microphone, embedded antenna and 6 Dof IMU Can be programmed with Arduino, MicroPython,...

Price €24.96
  • Out-of-Stock

RPi IR-CUT camera

Camera module Raspberry Pi, IR-CUT integrated, supports night vision, type B. Built-in removable IR-CUT filter, eliminates color distortion in daylight Comes with infrared LED, supports night vision 5 megapixel OV5647 sensor Adjustable focus distance CCD size: 1/4 inch Aperture (F): 1.2...

Price €24.95

4.3" e-paper 800x600 screen

It is a serial interface E-paper display module, 4.3 inches, 800 × 600 resolution, with integrated font libraries, ultra low power consumption.

Price €54.00
  • On sale!