For ODROID-C1+ / C0 / C2 AC input 100~240 VoltDC output 5Volt / 2AEU compatiblePlug specification: inner diameter (positive) 0.8 mm and outer diameter (negative) 2.5 mm Note: This power supply is not compatible with ODROID-XU4.ODROID C2 / C+ / C0: inner diameter (positive) 0.8 mm and outer...
Converts Grove connector to pin headers Compatible with Raspberry Pi and Arduino Length of each wire: 20cm Grove side uses a looped connector
Measure indoor air quality - total volatile organic compounds (TVOC) and equivalent CO2 (eCO2) - with this digital sensor for Raspberry Pi and Arduino. The SGP30 sensor measures two different types of gases: volatile organic compounds (such as hydrocarbons) and equivalent carbon dioxide (H2...
MEGA 2560 R3 and MEGA 2560 Plus microcontroller boards are based on ATMEGA2560 Equipped with the CP2102 USB serial chip Fully IDE compatible Arduino The major differences between the boards are: the voltage regulator chip, the addition of I/O and the USB port
Supports up to two cameras so you can play with Raspberry pi binocular vision projects
M.2 2280 SSD (6.0 Gbps) SATA III with RPi OS USB bootable firmware Compatible with Raspberry Pi 4B and Raspberry Pi 400 120GB or 240GB storage capacity
It is a 12-port USB power adapter that can charge up to 12 digital devices at the same time. It can ensure safe charging as it offers protection against overheating, current overload and short circuit. Different USB ports from 1.5A to 3.5A can meet your different requirements. The strong...
Verbatim Vi550 2,5" SSD SATA III High reliability and low power flash controller for longer battery life Write speed: up to 560 Mb/s Client SSD for desktop and laptop upgrades
Geekservo 9g servo motor Compatible with the famous brick building set 270° or 360° angle control (depending on model) Working voltage from 3,3 to 6V
Mini or Micro HDMI Male to HDMI Female Extension Cable 1m Copper braided shielding sleeve - CE, FCC, RoHS certifications Supports 1920*1080 resolution Ideal for multimedia use, monitor, TV, camera, projector, DVD player,...
18650 battery charger with2 x 5V 1A/2.1A USB outputs Motherboard equipped with overcharge, discharge and overcurrent protection Automatic charge stop to prevent overcharging of devices Equipped with an intelligent digital display screen
FT232RL chip RXD / TXD transceiver communication indicator 5 V or 3.3 V USB power supply (switch via jumper) With overcurrent protection (500mA self-restoring fuse)
Discover the official case specially designed for your Raspberry Pi Zero! Composed of several removable parts and easily mountable, it will also accommodate a camera module for a practical video surveillance system through a slot provided! Included: a 25mm camera cover.
Verbatim PinStripe Retractable Micro USB Key Lightweight, sleek design and retractable USB connector Up to 8 MB/s read and 2.5 MB/s write Available in 3 versions: 16 GB, 32 GB and 64 GB
I2C digital UV sensor module designed to measure ultraviolet and visible light Sensitive detection and fast response sensor Supports interrupt output, programmable upper/lower threshold Compatible with Raspberry Pi, Arduino, STM32
Ideal for improving the efficiency and speed of read/write transfer rates of Compute Module 4 Multi PCI-E compatible (PCI-E × 1 / × 4 / × 8 / × 16) Compatible with various sizes of M.2* SSDs (2230, 2242, 2260, 2280) On-board Operation LED indicator: Power on; read / write *SDD holding screws...
Transparent case for Arduino Mega Rev 3 with accessible headers Material: Acrylic (2.8 mm) Weight: 60 g Dimensions: 10 x 3.4 cm
Universal, the official 5V 2.5A micro USB power supply for Raspberry Pi has been specifically designed to take full advantage of the improved power management on the Raspberry Pi 3 board. Delivered with 4 plugs: UK/EURO/USA/AUS
Ideal for your small jobs and repairs, this set includes : 1 electric mini-drill 5 high speed steel drills (0.5; 1.0; 1.5; 2.3; 3.0 inner diameter) 5 copper chucks (0.5; 0.5, 1.0, 2.3, 3.0 inner diameter) 4 ceramic polishing wheels and 1 wheel cutter 1 EU power supply
GSR (Galvanic Skin Response) sensor to reflect your emotions simply by placing two electrodes next to each other Ideal for monitoring sleep quality, lie detector, etc. Adjust sensitivity via potentiometer Easy-to-read analog voltage output
CompatibleArduino UNO R3, Designed for school education, ideal for STEM projects, Simplified coding and electronics with built-in LEDs, Develops problem solving and stimulates creativity.
White or black Micro-HDMI to HDMI (type A) cable (1 meter) for Raspberry Pi 4.
FT232RL USB-C to UART (TTL) communication board Compatible with Mac OS, Linux, Android, WinCE, Windows 7/8/8.1/10/11... 3 power supply modes 5 V output, 3.3 V output or powered by the target board (3.3 V-5 V) Dimensions: 46 x 19 mm
Gaming case ideal for creating a versatile retro gaming console that is portable and mobile, and now playable in home console mode Compatible with Raspberry Pi Compute Module 4 (CM4) only Integrated 3" IPS screen (640 x 480 px) 2 additional buttons "Turbo" and "Home
Français
Español
Italiano
Deutsch
