A tiny compact array of 77 individually controllable bright white LEDs. Ideal for scrolling text, animations, bar graphs or just general lighting, it is compatible with Raspberry Pi and Arduino.
Special right angle breakout module for Pi 400 Easy installation without soldering Offers 3 additional breakouts 2x I2C (5 pins) + 1x SPI (5 pins) Reverse polarity protection (integrated in the breakouts)
This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity in a short range of about 5 cm. The LTR-559 is the same type of sensor you'll find next to your phone's camera that detects when it's next to your ear to disable the touch screen. It's...
Add lots of extra analog input and output pins to your project Raspberry Pi!
These low-power laser-based time-of-flight sensors have high accuracy and sampling rate, and this particular sensor has a wide detection range, from 4 cm to 4 meters. Use it as a proximity sensor, for presence detection, or as a laser tape measure! The speed, accuracy and range make this sensor...
Breakout navigation module ideal for surface detection and floor tracking of a robot vacuum cleaner PAA5100JE sensor that uses a low-resolution camera and intelligent algorithms to detect surface movement Very narrow range of 15 to 35 mm, suitable for use with a wide variety of...
This fully isolated, I2C-controllable switch can switch large loads up to 40 V at 10 A.
You can use it as a fun way to see your heart rate or have LEDs or lights pulsate to the rhythm of your heart. It is compatible Raspberry Pi and Arduino. This sensor has three LEDs - green, red and infrared - and photodetectors that can be used together to detect the amount of light reflected...
Dual LED matrix (5x7 + decimal point) with retro look Ideal for simultaneous display of two numbers or two letters (countdowns, percentage readings, ...) or a graphic display No soldering required, this breakout board is pre-assembled and includes a LED driver mounted on an I2C breakout and...
The 3-degree accelerometer sensor measures acceleration on 3 axes. If you need simple and reliable motion detection for your project, then this is a great choice! It also has some clever features built in. It has interrupts for motion in each axis, double tap detection and free fall detection....
This ADS1015 ADC (analog-to-digital converter) package has three channels that can read voltages from -24 V to +24 V at sampling rates up to 3.3 KHz with 12-bit resolution. It is compatible with Raspberry Pi and Arduino and is ideal for measuring voltages quickly and accurately over a wide...
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because this...
Bluetooth LE development board designed for IoT and AI applications Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED Embedded microphone, embedded antenna and 6 Dof IMU Can be programmed with Arduino, MicroPython,...
Rather than controlling a stepper motor or DC motor, it is specifically designed to control haptic motors - buzzers and vibration motors.
Breakout Garden HAT Expansion Board Easily add new Breakout ports to connect your modules Reverse polarity protection Available in 3 versions: 6 ports - I2C, 6 ports - I2C(x4) / SPI(x2), 3 ports - I2C
A fast and accurate environmental sensor that can measure temperature, pressure and altitude. If you're looking for a simple temperature and pressure sensor, then this is the one to choose.Accurate (± 1 hPa, ± 1.0 ° C, ± 1 meter), and ideal for keeping track of temperatures around your home or...
This super cute 5x5 RGB LED matrix board is a great way to visualize sensor data or for simple animations or notifications, and is compatible with Raspberry Pi and Arduino. These small arrays are great for viewing data from other boards in a Breakout Garden HAT, such as the environmental data...
Use this motion sensor in your DIY projects or drone to accurately measure three different types of motion on three different axes with 16-bit resolution. It also uses low power, so it's ideal for integration into battery-powered projects, and is compatible with Raspberry Pi and Arduino.
This sophisticated optical flow sensor detects the movement of surfaces in front of it, from ~ 80 mm to infinity! The PMW3901 is a clever little sensor that uses a low-resolution camera and smart algorithms to detect the motion of surfaces. A great use for this is to detect and correct the drift...
An RGBW-lit, clickable switch card, perfect for adding navigation or control to your projects Raspberry Pi or Arduino.
Français
Español
Italiano
Deutsch
Portugais
