Français
Español
Italiano
Deutsch
IO development board for...
IO development board for Raspberry Pi Pico Multiple communication ports: x2 I2C, x2 UART, 2 x SPI, x3 analog I/O and x13 digital I/O 6.5-12 V power supply interface Compatible with Lego extensions
Filtres
Category: Breakout boards
Sort by:
STM32 NUCLEO-F401RE development...
NUCLEO-64 development board based on the STM32F411RET6 32 bits ARM Cortex-M4 microcontroller Ideal for industrial use, prototyping,... Arduino UNO R3 and ST Morpho sockets extend the connection functionalities Integrates ST-LINK/V2-1 (programmer/debugger) and complete HAL STM32 software...
Price
€17.90
- Out-of-Stock
UBLOX MAX-M8Q GPS Breakout...
Breakout board with uBLOX MAX-M8Q-10 module and SMA female connector for active antennas Quick start, PPS LED and Supercap included to maintain settings during power cycles Suitable for HAB use with maximum altitude of 50000 meters in flight mode TX, RX, TP (PPS output), 3 V supply (2.7 V to 3.6...
Price
€31.96
- Out-of-Stock
UBLOX MAX-M8C GPS Breakout...
Breakout board with uBLOX MAX-M8C-1 module with additional power filtering, chip antenna and decoupling capacitor Light weight of only 1.5g Suitable for HAB use with maximum altitude of 50000 meters in flight mode VCC, GND and RX & TX, SCL & SDA for I2C
Price
€29.95
Microcontroller board with...
Board with the RP2040 microcontroller chip designed by Raspberry Pi in the UK Embeds a 1.28-inch round LCD display Includes temperature sensor, accelerometer and gyroscope Full SDK, C/C++ and MicroPython support
Price
€18.00
White on Blue LCD display
Grove plug-and-play display Displays up to 32 characters, with support for English, Japanese and Greek alphabets Compatible with Arduino and Raspberry Pi Ideal for displaying temperature or time, or any other project requiring a simple display
Price
€6.00
- Out-of-Stock
MLX90640 Breakout 55° Angle...
It's perfect for integrating into projects - industrial, scientific or just plain fun - and much more affordable than most thermal imaging cameras. Our distribution makes it easy to use the camera with your Raspberry Pi or Arduino, using an I2C and 3-6V power supply. And it's available in two...
Price
€73.95
- Out-of-Stock
6-channel spectral sensor AS7262...
Detect six distinct channels of visible light with this spectral sensor. Unlike normal RGB color sensors, with the AS7262, you'll get six bands of color readings that roughly translate into red, orange, yellow, green, blue and violet. The two built-in white LEDs allow you to illuminate materials...
Breakout Pico Explorer Base Map
Breakout board with integrated Breadboard, ADC inputs, speaker and 1.54" IPS LCD (240x240 px) Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x controllable switches, 2 x half-bridge motor drivers, 2 x I2C Breakout Garden sockets Fully assembled with rubber feet,...
SGP30 Breakout air quality sensor
Measure indoor air quality - total volatile organic compounds (TVOC) and equivalent CO2 (eCO2) - with this digital sensor for Raspberry Pi and Arduino. The SGP30 sensor measures two different types of gases: volatile organic compounds (such as hydrocarbons) and equivalent carbon dioxide (H2 level...
ESP-12K development board with WIFI
NodeMCU development board based on the ESP32-S2 Ideal for secondary development without the need for additional microcontrollers Integrated WI-FI and offers a wide range of connectivity: UART/GPIO/PWM/ADC/I2C Designed for various applications: IoT, home automation, portable electronics...
Price
€11.40
BME680 Breakout - Temperature,...
The BME680 sensor allows you to measure temperature, pressure, humidity and indoor air quality, and is compatible with Raspberry Pi and Arduino! You can use it to monitor all aspects of your indoor environment. Its gas resistances will react to changes in volatile organic compounds and can be...
MLX90640 Breakout 110° Angle...
It's perfect for integrating into projects - industrial, scientific or just plain fun - and much more affordable than most thermal imaging cameras. Our distribution makes it easy to use the camera with your Raspberry Pi or Arduino, using an I2C and 3-6V power supply. And it's available in two...
Price
€66.00
Pico Breakout Garden Base...
Connect up to 6 breakout modules (4 x I2C and 2 x SPI) to your Raspberry Pi Pico Numbered board connection ports and M.2.5 mounting holes to secure the board Reverse polarity protection Compatible with most Breakout modules Pimoroni
Price
€14.95
BME280 Breakout environmental...
A very good environmental sensor ideal for indoor monitoring of temperature, pressure and humidity, or even outdoors in a suitable enclosure. It is compatible with Raspberry Pi and Arduino. If you are an iOS user, there is a Homebridge plugin for the BME280 to allow you to use the sensor for home...
Pin Breakout for Raspberry Pi Pico
The Simply Servo compact board for Raspberry Pi Pico allows for control of up to 8 servos simultaneously, making it ideal for advanced robotics projects with the RiPi Pico. The board must be used with a Pico that has soldered pin headers, the Pico can then fit directly into the board. In addition...
Price
€12.00
Breakout 1.12" OLED screen - SPI
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because...
Price
€18.95
Luminance and color sensor...
A really sophisticated and accurate color and luminance sensor that is compatible with Raspberry Pi and Arduino. In addition to detecting RGB color and light level, it rejects 50/60Hz light noise, has a wide detection range and two LEDs for illumination. This type of sensor is the same one you...
Price
€10.96
MCP9600 Breakout Thermocouple...
This MCP9600 amplifier works with eight different types of thermocouples and has built-in temperature alerts. It is compatible with Raspberry Pi, Arduino and with HAT garden Breakout without soldering. Thermocouples are temperature sensors that are well suited for more industrial use where...
Price
€22.96
RV3028 Breakout Real Time Clock
The RV3028 RTC breakout is perfect for adding timing to your project and, thanks to the small built-in battery, will keep time when your device is turned off. The tiny silver oxide battery (8mAh, included) keeps the RTC running when your device (Raspberry Pi or Arduino) is turned off and can...
0.96" (160 x 80) SPI color LCD...
A handy little LCD screen for adding readouts to your projects. This 0.96" SPI LCD has a 2:1 aspect ratio, wide viewing angles (IPS) and works with Raspberry Pi or Arduino. It is bright, has excellent resolution and you will be able to display small information such as timers, clocks, sensor...
Distribution of the DRV8830 DC...
This small brushed DC motor driver is speed-adjustable, bi-directional, and has a configurable current limit that can be increased to 1 A (from 0.2 A) by bridging the pads on the bottom of the board. You can use up to four at a time and control them independently by changing the I2C address...
Price
€11.95
PGA2040 breakout board
Compact breakout card in the form of a Pin Grid Array (PGA) with RP2040 chip (Dual ARM Cortex M0+ - up to 133Mhz) Programmable with C++, MicroPython or CircuitPython languages 264KB SRAM, 8MB QSPI flash supporting XiP 30 multipurpose I/Os (4 can be used for ADC), 8 GND pins
Price
€7.80
Breakout color LCD screen
Sharpness, high resolution, wide viewing angles (IPS), this 1.3 " square color LCD screen, 240x240 pixels, will add spice to your projects Raspberry Pi or Arduino. A very sharp and bright screen thanks to its wide viewing angles and protected against polarity inversion.